| ??? 01/02/06 18:07 Read: times |
#106384 - The key to success is flux Responding to: ???'s previous message |
The key to success is flux, not the iron tip nor thin solder wire.
Use tons of non-corrosive liquid soldering flux. Make a pool of flux at the pins. No need to solder pins one by one. You can solder 5 to 6 pins at one sweep. Even without solder resist, it's OK. If a solder bridge is made between pins, add more flux and sweep the iron again. Please consider the percentage of flux and solder in reflow solder paste. Flux reduces viscosity of melted solder. "HAND SOLDERING TUTORIAL FOR FINE PITCH QFP DEVICES" from SiLabs http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/en/an114.pdf Tsuneo |
| Topic | Author | Date |
| Second layer of PCBs | 01/01/70 00:00 | |
| hmmm | 01/01/70 00:00 | |
| Another idea... | 01/01/70 00:00 | |
| A very good idea! | 01/01/70 00:00 | |
| A clarification | 01/01/70 00:00 | |
| This way? | 01/01/70 00:00 | |
| No problem | 01/01/70 00:00 | |
| better... | 01/01/70 00:00 | |
| That's the solution | 01/01/70 00:00 | |
| Farady Cage ? | 01/01/70 00:00 | |
| Oops! | 01/01/70 00:00 | |
| Single double-sided PCB ! | 01/01/70 00:00 | |
| Depends | 01/01/70 00:00 | |
| Layer | 01/01/70 00:00 | |
| wow 12 replys in 1 hour !// | 01/01/70 00:00 | |
| Yeah! | 01/01/70 00:00 | |
| Close and solid ground plane | 01/01/70 00:00 | |
| Thank you! | 01/01/70 00:00 | |
| Some pics | 01/01/70 00:00 | |
| Your Supply tracks are too thin | 01/01/70 00:00 | |
| Thickness | 01/01/70 00:00 | |
| Decoupling caps? | 01/01/70 00:00 | |
| Top or botttom | 01/01/70 00:00 | |
| Draw it | 01/01/70 00:00 | |
| Ink != Etch resist | 01/01/70 00:00 | |
| Indeed | 01/01/70 00:00 | |
| Time consuming | 01/01/70 00:00 | |
| Special ink | 01/01/70 00:00 | |
| I would... | 01/01/70 00:00 | |
| is it for? | 01/01/70 00:00 | |
| Is because... | 01/01/70 00:00 | |
| Cant get anything better! | 01/01/70 00:00 | |
| It's easy to find all my posts... | 01/01/70 00:00 | |
| DIP => Bottom Routing, Top Plane | 01/01/70 00:00 | |
| Great! | 01/01/70 00:00 | |
| Drilling is easier | 01/01/70 00:00 | |
| Another doubt | 01/01/70 00:00 | |
| Remedies | 01/01/70 00:00 | |
| My idea | 01/01/70 00:00 | |
| Not a good idea for fast digital circuit | 01/01/70 00:00 | |
| Try SMD | 01/01/70 00:00 | |
| A new lowcost direct PCB printer ? | 01/01/70 00:00 | |
| SMD | 01/01/70 00:00 | |
| The key to success is flux | 01/01/70 00:00 | |
| Interesting link | 01/01/70 00:00 | |
| Kai, you are right | 01/01/70 00:00 | |
Highly interesting article! | 01/01/70 00:00 | |
| Soldering | 01/01/70 00:00 | |
| For your views.. | 01/01/70 00:00 | |
| Without schematic... | 01/01/70 00:00 | |
| Schematic | 01/01/70 00:00 |