| ??? 12/31/05 14:48 Read: times |
#106273 - Single double-sided PCB ! Responding to: ???'s previous message |
Andy just took the words out of my mouth.
Farshid said:
BTW are you making PCBs by yourself ? I asked you for that to see if you are fabricating your PCBs yourself then i could suggest you such a scheme. But i did it upside down compared to what andy said. I put my drawn PCB traces on the bottom and the ground plane at the top. It would be very hard to solder the DIP components(such as sockets) in the top layer.There are few ground pins to solder compared to the whole pins. To Summarize : You could use a double sided PCB .Coat the top layer with a Acid-Resistant material and put your drawn PCB on the bottom.After Etching For the components which shouldn't make any contact with ground drill a clearance hole. In case you have a .6mm hole drill a 1.5mm bit at the top layer just to remove the copper not all the way throught the hole. I have created this webpage using Mozilla composer And i am viewing it with Mozila FireFox , so no problem :) It is nice of you to share your experiences with others. Good Luck, Farshid |
| Topic | Author | Date |
| Second layer of PCBs | 01/01/70 00:00 | |
| hmmm | 01/01/70 00:00 | |
| Another idea... | 01/01/70 00:00 | |
| A very good idea! | 01/01/70 00:00 | |
| A clarification | 01/01/70 00:00 | |
| This way? | 01/01/70 00:00 | |
| No problem | 01/01/70 00:00 | |
| better... | 01/01/70 00:00 | |
| That's the solution | 01/01/70 00:00 | |
| Farady Cage ? | 01/01/70 00:00 | |
| Oops! | 01/01/70 00:00 | |
| Single double-sided PCB ! | 01/01/70 00:00 | |
| Depends | 01/01/70 00:00 | |
| Layer | 01/01/70 00:00 | |
| wow 12 replys in 1 hour !// | 01/01/70 00:00 | |
| Yeah! | 01/01/70 00:00 | |
| Close and solid ground plane | 01/01/70 00:00 | |
| Thank you! | 01/01/70 00:00 | |
| Some pics | 01/01/70 00:00 | |
| Your Supply tracks are too thin | 01/01/70 00:00 | |
| Thickness | 01/01/70 00:00 | |
| Decoupling caps? | 01/01/70 00:00 | |
| Top or botttom | 01/01/70 00:00 | |
| Draw it | 01/01/70 00:00 | |
| Ink != Etch resist | 01/01/70 00:00 | |
| Indeed | 01/01/70 00:00 | |
| Time consuming | 01/01/70 00:00 | |
| Special ink | 01/01/70 00:00 | |
| I would... | 01/01/70 00:00 | |
| is it for? | 01/01/70 00:00 | |
| Is because... | 01/01/70 00:00 | |
| Cant get anything better! | 01/01/70 00:00 | |
| It's easy to find all my posts... | 01/01/70 00:00 | |
| DIP => Bottom Routing, Top Plane | 01/01/70 00:00 | |
| Great! | 01/01/70 00:00 | |
| Drilling is easier | 01/01/70 00:00 | |
| Another doubt | 01/01/70 00:00 | |
| Remedies | 01/01/70 00:00 | |
| My idea | 01/01/70 00:00 | |
| Not a good idea for fast digital circuit | 01/01/70 00:00 | |
| Try SMD | 01/01/70 00:00 | |
| A new lowcost direct PCB printer ? | 01/01/70 00:00 | |
| SMD | 01/01/70 00:00 | |
| The key to success is flux | 01/01/70 00:00 | |
| Interesting link | 01/01/70 00:00 | |
| Kai, you are right | 01/01/70 00:00 | |
Highly interesting article! | 01/01/70 00:00 | |
| Soldering | 01/01/70 00:00 | |
| For your views.. | 01/01/70 00:00 | |
| Without schematic... | 01/01/70 00:00 | |
| Schematic | 01/01/70 00:00 |