| ??? 03/27/06 12:43 Read: times |
#113185 - AD9835 Cycles Responding to: ???'s previous message |
I need to generate a certain number of sinusoidal cycles. I tried with this chip but it seems it is for continuous operations.
I tried loading freq 1 register with 0 frequency while frequency 0 register with required frequency, when I switch between the 2 registers the chip doesn't wait till the cycle is complete, it switches the other frequency register immediately distorting the previous signal. I have been experimenting on a pc based scope to capture just one cycle and monitor the switch over. Can the AD9835 operate in this mode of operation? Does anybody know of a chip that waits till the cycle is complete to switch over to the other frequency register? I'm redesigning the circuit using ZN428 DAC chip and building my sinusoidal from scratch. this way I will have complete control over my frequency generation, but will lose on board size. I'm taking into consideration the analog and digital solid ground planes and will post pictures here. Mahmood |
| Topic | Author | Date |
| AD9835 noise problem | 01/01/70 00:00 | |
| noise | 01/01/70 00:00 | |
| Recommendations | 01/01/70 00:00 | |
| quick fix? | 01/01/70 00:00 | |
| Maybe | 01/01/70 00:00 | |
| Transmission lines | 01/01/70 00:00 | |
| 5MHz? | 01/01/70 00:00 | |
| Spectrum analyser | 01/01/70 00:00 | |
| It's ground noise | 01/01/70 00:00 | |
| ground noise and groundhogs | 01/01/70 00:00 | |
| Harmonics as well | 01/01/70 00:00 | |
| comments | 01/01/70 00:00 | |
| Why separate the analog & digital gnds? | 01/01/70 00:00 | |
| Splitting the ground plane | 01/01/70 00:00 | |
| Evaluation board | 01/01/70 00:00 | |
| thin ground? | 01/01/70 00:00 | |
| that is why you use star | 01/01/70 00:00 | |
| Ground wire in parallel | 01/01/70 00:00 | |
| and a twisted pair? | 01/01/70 00:00 | |
| Would do! | 01/01/70 00:00 | |
| does not exist, Jan if you used twisted | 01/01/70 00:00 | |
| The clock signal? | 01/01/70 00:00 | |
| oh well | 01/01/70 00:00 | |
| Indeed | 01/01/70 00:00 | |
| is there a way... | 01/01/70 00:00 | |
| Hardly | 01/01/70 00:00 | |
| unfortunately not | 01/01/70 00:00 | |
| twisted pair | 01/01/70 00:00 | |
| is that not obvious | 01/01/70 00:00 | |
| No ground traces, but patches | 01/01/70 00:00 | |
| the bane of many | 01/01/70 00:00 | |
| Why 1 or 2 layers | 01/01/70 00:00 | |
| it's nice! | 01/01/70 00:00 | |
| No Secrets | 01/01/70 00:00 | |
| DALO 2M professional | 01/01/70 00:00 | |
| UV ink Problem | 01/01/70 00:00 | |
| Mixed method? | 01/01/70 00:00 | |
| No Need for DALO | 01/01/70 00:00 | |
| CE | 01/01/70 00:00 | |
| Single step mode | 01/01/70 00:00 | |
| If you want... | 01/01/70 00:00 | |
| mmm | 01/01/70 00:00 | |
| Dreaming | 01/01/70 00:00 | |
| LAYOUT | 01/01/70 00:00 | |
| 100nF caps | 01/01/70 00:00 | |
| 100nF ? | 01/01/70 00:00 | |
| ok | 01/01/70 00:00 | |
| Some checks | 01/01/70 00:00 | |
| It's my daily job! | 01/01/70 00:00 | |
| Unfortunately, no | 01/01/70 00:00 | |
| simulate double-layer | 01/01/70 00:00 | |
| Seperate Analog and Digital Supply | 01/01/70 00:00 | |
| RLC-filters don't help? | 01/01/70 00:00 | |
| separate | 01/01/70 00:00 | |
| And... | 01/01/70 00:00 | |
| Seperate Supplies | 01/01/70 00:00 | |
| Evaluation board | 01/01/70 00:00 | |
| No not that one... | 01/01/70 00:00 | |
| Curly | 01/01/70 00:00 | |
| OT: Hair | 01/01/70 00:00 | |
| lets have pictures | 01/01/70 00:00 | |
| No no... | 01/01/70 00:00 | |
| http://www.k6ese.com/Mar_Vista_Shack.htm | 01/01/70 00:00 | |
| but it is relevant | 01/01/70 00:00 | |
| No wonder... | 01/01/70 00:00 | |
| waveforms | 01/01/70 00:00 | |
| Link to DDS page | 01/01/70 00:00 | |
| Add the second stage... | 01/01/70 00:00 | |
| Filter components | 01/01/70 00:00 | |
| clock | 01/01/70 00:00 | |
| What clock | 01/01/70 00:00 | |
| ? | 01/01/70 00:00 | |
| Sampling theorem | 01/01/70 00:00 | |
| But... | 01/01/70 00:00 | |
| Can't find it now | 01/01/70 00:00 | |
| Ground of probe? | 01/01/70 00:00 | |
| even better | 01/01/70 00:00 | |
| Good trick! | 01/01/70 00:00 | |
| same point | 01/01/70 00:00 | |
| Both | 01/01/70 00:00 | |
| I feel strong now! | 01/01/70 00:00 | |
| Funny! | 01/01/70 00:00 | |
| Depends... | 01/01/70 00:00 | |
| Oh Dear | 01/01/70 00:00 | |
| NO analog outputs | 01/01/70 00:00 | |
| since there is no schematics presented | 01/01/70 00:00 | |
| Publishing failed | 01/01/70 00:00 | |
| then give a link to an ORCAD drawing | 01/01/70 00:00 | |
| Schematics | 01/01/70 00:00 | |
| corrections | 01/01/70 00:00 | |
| Big test | 01/01/70 00:00 | |
| Try This Schematic... | 01/01/70 00:00 | |
| one more problem | 01/01/70 00:00 | |
| I miss the second 300R resistor | 01/01/70 00:00 | |
| Terminating Resistor. | 01/01/70 00:00 | |
| Answers | 01/01/70 00:00 | |
| University of Kai | 01/01/70 00:00 | |
| Keep us informed... | 01/01/70 00:00 | |
| of course | 01/01/70 00:00 | |
| Update | 01/01/70 00:00 | |
| Eager to know | 01/01/70 00:00 | |
| Me too | 01/01/70 00:00 | |
| Autoreload | 01/01/70 00:00 | |
| Current source output | 01/01/70 00:00 | |
| Electronic World Feb 06 | 01/01/70 00:00 | |
| Superb! | 01/01/70 00:00 | |
| No surprise | 01/01/70 00:00 | |
| AD9835 Cycles | 01/01/70 00:00 | |
| Solid Ground Plane Update!!!!! | 01/01/70 00:00 | |
| Very nice results! | 01/01/70 00:00 | |
| Low frequency | 01/01/70 00:00 | |
| SLIGHt correction | 01/01/70 00:00 | |
| OPA27? | 01/01/70 00:00 | |
| Cross talk on PCB tracks | 01/01/70 00:00 | |
| Have a look at this plot | 01/01/70 00:00 | |
| Interesting question | 01/01/70 00:00 | |
further interesting question | 01/01/70 00:00 |