Email: Password: Remember Me | Create Account (Free)

Back to Subject List

Old thread has been locked -- no new posts accepted in this thread
???
02/13/07 00:12
Modified:
  02/13/07 00:30
Read: times


 		 #132699 - I got what you mean
Responding to: ???'s previous message
Daniel said:
If you check carefully Atmel AT89S8253 manual page 11, you will see Internal RESET signal (fig. 7-1, bottom), that is not not related with RST pin 9.
This signal is the REAL reset , that resets ALL the internal things. Pin 9 RST only resets PC, ports and SFRs. So, no matter what do you do to pin 9, if Vcc rise time is not fast enough.

My idea was, that a properly working external reset could override the improperly working internal one. But I think you are right and that has no influence.

Good luck,
Kai

List of 83 messages in thread
TopicAuthorDate
Comments about AT89S8253            01/01/70 00:00      
   are you surprised, it's Atmel            01/01/70 00:00      
      are you surprised, it's Erik            01/01/70 00:00      
   Not neccessarily bugs...            01/01/70 00:00      
      AT89S8253 ALE pulses            01/01/70 00:00      
         Yes, a bit imprecise            01/01/70 00:00      
            And Vcc rise time...            01/01/70 00:00      
               What kind of "external reset"?            01/01/70 00:00      
      not that fast, Kai            01/01/70 00:00      
         Not so fast, Jan...            01/01/70 00:00      
            speaking from experience...            01/01/70 00:00      
               ...as engineer?            01/01/70 00:00      
               make that darn datasheet 5000 pages            01/01/70 00:00      
                  Exactly!            01/01/70 00:00      
                     I'm not sure what you mean, Kai            01/01/70 00:00      
                        That's what I meant            01/01/70 00:00      
                  Serial hung.            01/01/70 00:00      
            migration            01/01/70 00:00      
               Please quote carefully...            01/01/70 00:00      
         is it possible            01/01/70 00:00      
            I don't think so...            01/01/70 00:00      
   Any reset            01/01/70 00:00      
      I've wondered about this ...            01/01/70 00:00      
         Indeed!            01/01/70 00:00      
            Perhaps they're part of the problem ...            01/01/70 00:00      
               Do you think...            01/01/70 00:00      
                  That's not clear to me.            01/01/70 00:00      
               not here            01/01/70 00:00      
                  These are all COTS SMPS\'            01/01/70 00:00      
                     startup            01/01/70 00:00      
            Is it not instead a problem of letting reset go be            01/01/70 00:00      
               staring problem            01/01/70 00:00      
                  have you never stared at a problem :)            01/01/70 00:00      
                     Ah, so you meant....            01/01/70 00:00      
      What resets?            01/01/70 00:00      
         Any reset!            01/01/70 00:00      
            I got what you mean            01/01/70 00:00      
               Circuit proposed            01/01/70 00:00      
                  Interesting!            01/01/70 00:00      
         SMPS and LC filter            01/01/70 00:00      
            Switchers & low ESR            01/01/70 00:00      
               you missed the point            01/01/70 00:00      
                  What 100nF?            01/01/70 00:00      
            Rob is right            01/01/70 00:00      
               Ah            01/01/70 00:00      
                  Erik, you do use switchers frequently...            01/01/70 00:00      
                     nope, all I know is that they work and work and wo            01/01/70 00:00      
                        Thanks            01/01/70 00:00      
                           so ... Kai ... how would YOU build a power switch?            01/01/70 00:00      
                              there is no difference between "no power" and "in            01/01/70 00:00      
                                 There is a difference ... no power means no clock            01/01/70 00:00      
                                    ah, an investigatory measure            01/01/70 00:00      
                                       The Max1232 gets pretty confused ...            01/01/70 00:00      
                                          what decoupling do you have across the supervisor            01/01/70 00:00      
                                             This was a Philips ...            01/01/70 00:00      
                                                Too fast?            01/01/70 00:00      
                                                   The risetime isn\'t all that fast.            01/01/70 00:00      
                                          More details, please?            01/01/70 00:00      
                                             So far, it's just the reset that's been broken            01/01/70 00:00      
                                                Throw away the DS1232!!            01/01/70 00:00      
                                                   I\'ll have to send for a couple ...            01/01/70 00:00      
                                                      I've seen that one and it did not work            01/01/70 00:00      
                                                         Especially difficult to design            01/01/70 00:00      
                                                      Datasheets            01/01/70 00:00      
                                                      610msec reset active time of MAX1232 not enough?            01/01/70 00:00      
                                                         Let's get to the bottom of it ...            01/01/70 00:00      
                                                            Some ideas...            01/01/70 00:00      
                                                               each flash/eeprom HAS a charge pump...            01/01/70 00:00      
                                                                  Exactly, Jan!            01/01/70 00:00      
                                                               Yes, but ...            01/01/70 00:00      
                                                                  Why there are reset issues            01/01/70 00:00      
                                                                     so you're saying I should pull down ALE and nPSEN            01/01/70 00:00      
                                                                        Real Reset            01/01/70 00:00      
                                                                     be careful...            01/01/70 00:00      
                                                                     never heard of that one, can you elaborate            01/01/70 00:00      
                                                                        Elaborations on Reset            01/01/70 00:00      
                                                                           Mayabe that's worth some study ...            01/01/70 00:00      
                                                                              Which chip are you using?            01/01/70 00:00      
                                                                                 I can try several, but for now, Philips            01/01/70 00:00      
                                                   DS1232?            01/01/70 00:00      
                                                      it means Dallas Semiconductor            01/01/70 00:00      
                                                   re 1232            01/01/70 00:00      
   Sorry.            01/01/70 00:00      

Back to Subject List