| ??? 07/09/07 16:25 Read: times |
#141642 - Andy Neil is really someone Responding to: ???'s previous message |
Andy,
You are absolutely right! And I found you to be the most genious amongst so many experts here. You know so much detail... MC35 baud rate selection is 0, 300, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, and 460800 bps. This can be set with AT command AT+IPR=xxx <CR> <LF> where the xxx is the baudrate. It can be set to be "auto detect" as well with the AT command AT+IPR=0 <CR> <LF> |
| Topic | Author | Date |
| [Help] AT89C51 with GSM MC35i terminal problem | 01/01/70 00:00 | |
| testing and troubleshooting | 01/01/70 00:00 | |
| Simulated using 8051IDE | 01/01/70 00:00 | |
| RTFM! | 01/01/70 00:00 | |
| MC35i or MC35i Terminal? | 01/01/70 00:00 | |
| Not entirely true | 01/01/70 00:00 | |
| It is Siemens MC35i terminal | 01/01/70 00:00 | |
| Wrong connections | 01/01/70 00:00 | |
| What is IGT? | 01/01/70 00:00 | |
| IGT | 01/01/70 00:00 | |
| power supply? | 01/01/70 00:00 | |
| Stop!! | 01/01/70 00:00 | |
| Providing IGT | 01/01/70 00:00 | |
| Right | 01/01/70 00:00 | |
| I'm done with it. | 01/01/70 00:00 | |
| Manual reading time | 01/01/70 00:00 | |
| Must add the 2 more signal | 01/01/70 00:00 | |
| No, that's not right | 01/01/70 00:00 | |
| MC35i was siemens GSM modem module | 01/01/70 00:00 | |
| Pardon?? | 01/01/70 00:00 | |
| baudrate 9600? | 01/01/70 00:00 | |
| Not necessarily | 01/01/70 00:00 | |
| m35i with uC.. | 01/01/70 00:00 | |
| I think ur using wrong baud rate | 01/01/70 00:00 | |
| Wrong | 01/01/70 00:00 | |
| Andy Neil is really someone | 01/01/70 00:00 | |
Nearly | 01/01/70 00:00 |