| ??? 03/12/07 15:41 Read: times |
#134781 - Providing IGT Responding to: ???'s previous message |
Siemens recommend the following DC adapter for the terminal.
Sphere Design Type FW7207/12 Note that this adapter is from a third party. This adapter has bulit in logic to provide the IGT. If you are using other type of adapter, you must supply IGT by your micro controller. Once IGT is supplied, the status LED starts blinking fast (600ms ON, 600ms OFF). When Terminal finishes searching the network and logs on to network, the status LED should give short blinks (75ms ON, 3s OFF) |
| Topic | Author | Date |
| [Help] AT89C51 with GSM MC35i terminal problem | 01/01/70 00:00 | |
| testing and troubleshooting | 01/01/70 00:00 | |
| Simulated using 8051IDE | 01/01/70 00:00 | |
| RTFM! | 01/01/70 00:00 | |
| MC35i or MC35i Terminal? | 01/01/70 00:00 | |
| Not entirely true | 01/01/70 00:00 | |
| It is Siemens MC35i terminal | 01/01/70 00:00 | |
| Wrong connections | 01/01/70 00:00 | |
| What is IGT? | 01/01/70 00:00 | |
| IGT | 01/01/70 00:00 | |
| power supply? | 01/01/70 00:00 | |
| Stop!! | 01/01/70 00:00 | |
| Providing IGT | 01/01/70 00:00 | |
| Right | 01/01/70 00:00 | |
| I'm done with it. | 01/01/70 00:00 | |
| Manual reading time | 01/01/70 00:00 | |
| Must add the 2 more signal | 01/01/70 00:00 | |
| No, that's not right | 01/01/70 00:00 | |
| MC35i was siemens GSM modem module | 01/01/70 00:00 | |
| Pardon?? | 01/01/70 00:00 | |
| baudrate 9600? | 01/01/70 00:00 | |
| Not necessarily | 01/01/70 00:00 | |
| m35i with uC.. | 01/01/70 00:00 | |
| I think ur using wrong baud rate | 01/01/70 00:00 | |
| Wrong | 01/01/70 00:00 | |
| Andy Neil is really someone | 01/01/70 00:00 | |
Nearly | 01/01/70 00:00 |