| ??? 03/12/07 15:06 Read: times |
#134773 - IGT Responding to: ???'s previous message |
IGT is Ignition signal to the MC35i GSM module. Without this signal, the Terminal wouldn't start up. After receiving the IGT, the terminal switches from power down state to network searching state. This signal is in the same connector where you apply power to MC35i
Read the MC35i manual carefully, before you proceed further. |
| Topic | Author | Date |
| [Help] AT89C51 with GSM MC35i terminal problem | 01/01/70 00:00 | |
| testing and troubleshooting | 01/01/70 00:00 | |
| Simulated using 8051IDE | 01/01/70 00:00 | |
| RTFM! | 01/01/70 00:00 | |
| MC35i or MC35i Terminal? | 01/01/70 00:00 | |
| Not entirely true | 01/01/70 00:00 | |
| It is Siemens MC35i terminal | 01/01/70 00:00 | |
| Wrong connections | 01/01/70 00:00 | |
| What is IGT? | 01/01/70 00:00 | |
| IGT | 01/01/70 00:00 | |
| power supply? | 01/01/70 00:00 | |
| Stop!! | 01/01/70 00:00 | |
| Providing IGT | 01/01/70 00:00 | |
| Right | 01/01/70 00:00 | |
| I'm done with it. | 01/01/70 00:00 | |
| Manual reading time | 01/01/70 00:00 | |
| Must add the 2 more signal | 01/01/70 00:00 | |
| No, that's not right | 01/01/70 00:00 | |
| MC35i was siemens GSM modem module | 01/01/70 00:00 | |
| Pardon?? | 01/01/70 00:00 | |
| baudrate 9600? | 01/01/70 00:00 | |
| Not necessarily | 01/01/70 00:00 | |
| m35i with uC.. | 01/01/70 00:00 | |
| I think ur using wrong baud rate | 01/01/70 00:00 | |
| Wrong | 01/01/70 00:00 | |
| Andy Neil is really someone | 01/01/70 00:00 | |
Nearly | 01/01/70 00:00 |