| ??? 03/17/06 09:35 Read: times |
#112372 - Bin file compare Responding to: ???'s previous message |
I used the hex2bin supplied by Raisonance to do the conversion. To be double sure I even did the conversion of the hex file usings Keil's hex2bin utility. Both of the binary files obtained were identical. So I assume that there is some incompatibility as you have suggested. I even tried making the Raisonance IDE to output the binary image from the build process. But even that would not help as the outcome is the same. |
| Topic | Author | Date |
| .bin image when burnt does not function | 01/01/70 00:00 | |
| why not... | 01/01/70 00:00 | |
| Too many variables | 01/01/70 00:00 | |
| Hex file tested works fine | 01/01/70 00:00 | |
| so why | 01/01/70 00:00 | |
| hex works but not the bin | 01/01/70 00:00 | |
| Their problem? | 01/01/70 00:00 | |
| could it be | 01/01/70 00:00 | |
| A Note on HEX files | 01/01/70 00:00 | |
| The reason for Intel Hex | 01/01/70 00:00 | |
| Bin file compare | 01/01/70 00:00 | |
| You need the customer to do it | 01/01/70 00:00 | |
| Why not hex | 01/01/70 00:00 | |
my very first suggestion in parallel pos | 01/01/70 00:00 |