| ??? 06/10/13 19:06 Read: times |
#189903 - C8051F99x Responding to: ???'s previous message |
Have you looked at the C8051F99x which comes in QSOP-24 package?
It has the lowest power consumption SiLabs can deliver (downto 10nA deep sleep). It is programmed through the 2 wire C2 interface (3 if you include GND). But you will need level converters for 5V. |
| Topic | Author | Date |
| Low-power MCU needed | 01/01/70 00:00 | |
| OK, but wrong | 01/01/70 00:00 | |
| Wrong how? | 01/01/70 00:00 | |
| Silabs options | 01/01/70 00:00 | |
| C8051F99x | 01/01/70 00:00 | |
| Silabs | 01/01/70 00:00 | |
| look it up | 01/01/70 00:00 | |
| Looked up | 01/01/70 00:00 | |
| f53, no | 01/01/70 00:00 | |
| C8051F537A is OK | 01/01/70 00:00 | |
| the current in active mode is not the issue | 01/01/70 00:00 | |
| Inactive current | 01/01/70 00:00 | |
| re: wrong | 01/01/70 00:00 | |
| Consumers | 01/01/70 00:00 | |
| Zilog Z51F0410 | 01/01/70 00:00 | |
| Zilog | 01/01/70 00:00 | |
| Check you are entering idle ? | 01/01/70 00:00 | |
| idle current | 01/01/70 00:00 | |
| Idle test | 01/01/70 00:00 | |
| re: | 01/01/70 00:00 | |
| It floats! It floats! | 01/01/70 00:00 | |
| re:floats | 01/01/70 00:00 | |
| re:floats | 01/01/70 00:00 | |
| Timers | 01/01/70 00:00 | |
| More idle tests | 01/01/70 00:00 | |
| Better regulator? | 01/01/70 00:00 | |
| LR8K4 450V regulator | 01/01/70 00:00 | |
| also try CLKREG | 01/01/70 00:00 | |
| Clk Dividers are a good idea | 01/01/70 00:00 | |
| No dividers | 01/01/70 00:00 | |
| LP52 is cheaper too... | 01/01/70 00:00 | |
| LP52 | 01/01/70 00:00 | |
| No GND pin? | 01/01/70 00:00 | |
| re:idle | 01/01/70 00:00 | |
| Totally idle | 01/01/70 00:00 | |
| Checks | 01/01/70 00:00 | |
| More checks | 01/01/70 00:00 | |
| Power Down ? | 01/01/70 00:00 | |
| test setup | 01/01/70 00:00 | |
| STC | 01/01/70 00:00 | |
| C8051F86x/85x ? | 01/01/70 00:00 | |
| Maybe not such a good choice, after all? | 01/01/70 00:00 | |
| Support? | 01/01/70 00:00 | |
'51 support | 01/01/70 00:00 |