| ??? 03/02/06 08:58 Read: times |
#111037 - Rep: Ian Responding to: ???'s previous message |
Dear Ian,
No.If the display starts with diplaying the desired value(not the unwanted symlos) then if i change the ADC input the LCD display varies accordingly. It was also a surprise to me that insted of not using "while (1)" statement the MC is showing the change in the LCD if there is. I can send my diagram , but the process of attaching fig. is not known to me. With Thanks. Kaushik. |
| Topic | Author | Date |
| Regarding the LCD display problem | 01/01/70 00:00 | |
| Code i used | 01/01/70 00:00 | |
| overflowcount++; | 01/01/70 00:00 | |
| Detail about my aim. | 01/01/70 00:00 | |
| Main | 01/01/70 00:00 | |
| Rep: Ian | 01/01/70 00:00 | |
| Reset ? | 01/01/70 00:00 | |
| MC working after the reset | 01/01/70 00:00 | |
| So where's the problem? | 01/01/70 00:00 | |
| Reply to Russell | 01/01/70 00:00 | |
| Reset system | 01/01/70 00:00 | |
| Could be bad LCD Reset. | 01/01/70 00:00 | |
| LCD resets | 01/01/70 00:00 | |
| Rep: Prahlad Purohit | 01/01/70 00:00 | |
Yes you need a supervisor. | 01/01/70 00:00 |