| ??? 08/05/05 16:56 Modified: 08/05/05 17:00 Read: times |
#98890 - Use a buffer if using a XTAL Responding to: ???'s previous message |
Yes, if your XTAL2 pulse width matches the strobe reqirements. AFAIK XTAL2 waveforms are sinus and not sqare/trapezoidal [ binary type ]. Somebody correct me if I am wrong.
If you are using a Crystal do remember to buffer this signal before feeding any device. Regards, Prahlad Purohit |
| Topic | Author | Date |
| Feeding the DS1232 Dog | 01/01/70 00:00 | |
| Why? | 01/01/70 00:00 | |
| Exixsting Board | 01/01/70 00:00 | |
| That makes mr REALLY curious, what reaso | 01/01/70 00:00 | |
| Exixsting Board | 01/01/70 00:00 | |
| no free ALE possible ! | 01/01/70 00:00 | |
| but it does not need to be if the purpos | 01/01/70 00:00 | |
| the reason what you dont beleave... | 01/01/70 00:00 | |
| but ALE is "just" ALE, not a GPIO, pleas | 01/01/70 00:00 | |
| my plans | 01/01/70 00:00 | |
| Use a buffer if using a XTAL | 01/01/70 00:00 | |
| wave forms | 01/01/70 00:00 | |
| Not trivial... | 01/01/70 00:00 | |
| Thanks Kai...... | 01/01/70 00:00 | |
| conclusion | 01/01/70 00:00 | |
| What exactly goes wrong? | 01/01/70 00:00 | |
| here is whats go wrong | 01/01/70 00:00 | |
| Ground bounce! | 01/01/70 00:00 | |
| Another board is only solution | 01/01/70 00:00 | |
| 3 or 4 Pin Supervisor is also a solution | 01/01/70 00:00 | |
| Pronouncing | 01/01/70 00:00 | |
| Prahlad and Kai | 01/01/70 00:00 | |
Communication Failure. | 01/01/70 00:00 |