| ??? 04/07/06 06:49 Read: times |
#113791 - Voltage level at the backlight pins. Responding to: ???'s previous message |
Hi,
Sorry for the confusion,actually i thought that when i pass High/Low to the Port pin,the voltage at pin 16 of the LCD varies either to 0V or 3.3V.But it is not happening. The voltage at pin 16(K) remains in 0V and voltage at pin 15(A) is 3.3V for both HIGH and LOW input at the Port pin. I'm unable to recognise the mistake.Suggest me a solution for the problem. |
| Topic | Author | Date |
| To turn OFF LCD backlight | 01/01/70 00:00 | |
| Not by code | 01/01/70 00:00 | |
| LCD backlight | 01/01/70 00:00 | |
| To turn OFF LCD backlight | 01/01/70 00:00 | |
| MOSFET | 01/01/70 00:00 | |
| check the connection diagram | 01/01/70 00:00 | |
| Are you confusing between contrast... | 01/01/70 00:00 | |
| Check my changes in connections | 01/01/70 00:00 | |
| In some models.. | 01/01/70 00:00 | |
| Voltage level at the backlight pins. | 01/01/70 00:00 | |
| Is cathode short to the ground pin? | 01/01/70 00:00 | |
| cathode is at 0V | 01/01/70 00:00 | |
| Did you check for short between | 01/01/70 00:00 | |
| problem in contrast | 01/01/70 00:00 | |
| See earlier PNP solution | 01/01/70 00:00 | |
| Thank you very much | 01/01/70 00:00 | |
using 5V for backlight? | 01/01/70 00:00 |