| ??? 09/28/05 07:18 Read: times |
#101639 - another tack. Responding to: ???'s previous message |
1) I am using the 70691HEX board from HomeTechFLA (formerly Suncoast) which is a Temic TSCC51.
2) P1.6 for SDA and P1.7 for SCL. I'm not using any of the other pins at this time. 3) 4.7k Ohm 4) ? I don't understand what you are asking here. 5) Maybe 16 inches via the jumper wires I'm using. 6) the MAX6956 I have plugged into a breadboard. 7) Pin 2&3 are connected to the ground on my breadboard and pin 28 (V+) is connected to the 5 volts of my breadboard. My volt meter shows I've got 5.10 volts going to the breadboard. I've done some other testing with this '51 running a 5x7 DM LED on ports P1 and P3. Thats where I designed my fonts for the graphics displays I will be trying later. If I could get this chip to do anything I think I'd be able to move forward, but I can't even tell if I run the command to put it in test mode and see if anything is actually happening. I've even asked for some examples from Maxim and they have nothing to offer. |
| Topic | Author | Date |
| Using IIC.ASM | 01/01/70 00:00 | |
| address, speed | 01/01/70 00:00 | |
| Yes | 01/01/70 00:00 | |
| two things | 01/01/70 00:00 | |
| Is HW I2C easier? | 01/01/70 00:00 | |
| That may have been true then, this is no | 01/01/70 00:00 | |
| Replies. | 01/01/70 00:00 | |
| Check SBCMON | 01/01/70 00:00 | |
| SBCMON | 01/01/70 00:00 | |
| try a serial memory | 01/01/70 00:00 | |
| let us try another tack | 01/01/70 00:00 | |
| another tack. | 01/01/70 00:00 | |
| you have created just about the worst co | 01/01/70 00:00 | |
| Worst conditions. | 01/01/70 00:00 | |
| oscilloscope | 01/01/70 00:00 | |
| oscilloscope | 01/01/70 00:00 | |
| To verify that your programming ("burnin | 01/01/70 00:00 | |
| verifying. | 01/01/70 00:00 | |
| Without a scope you are kind of stuck, s | 01/01/70 00:00 | |
Success. | 01/01/70 00:00 | |
| back to the roots | 01/01/70 00:00 | |
| Success. | 01/01/70 00:00 | |
| To Mike! | 01/01/70 00:00 | |
| Hello Mehdi | 01/01/70 00:00 | |
| Or... | 01/01/70 00:00 | |
| this is a bootleg, use the original | 01/01/70 00:00 | |
| i2cbits | 01/01/70 00:00 | |
| you may want to go here | 01/01/70 00:00 | |
| Clock width is only 2 uSec in IIC_ASM ex | 01/01/70 00:00 |