| ??? 08/12/05 12:44 Read: times |
#99262 - using the COUNTER with the SERIAL port Responding to: ???'s previous message |
Dear Mr. Raymond,
One has to use timer2 in such applications. The sequence of operation. MOV T2CON,#0; Auto reload mode SETB RCLK; SETB TCLK; ; to be set to use timer 2 to be the baud rate enerator. MOV RCAP2H,#(number) ; depends on baud rate MOV RCAP2L,#(number) ; SETB TR2; start the timer Now the serial port is configured for use timer2 for baudrate. Now T1 & T2 are free for you use in counter mode. krishnaiah |
| Topic | Author | Date |
| using the COUNTER with the SERIAL | 01/01/70 00:00 | |
| I think your problem is that you are usi | 01/01/70 00:00 | |
| chip being used | 01/01/70 00:00 | |
| give a link | 01/01/70 00:00 | |
| wahts about the direction ? | 01/01/70 00:00 | |
| To Peter | 01/01/70 00:00 | |
| Change chip. | 01/01/70 00:00 | |
| Nope! I can't do that | 01/01/70 00:00 | |
| I do not know if micro can, but it would | 01/01/70 00:00 | |
| sorry | 01/01/70 00:00 | |
| How do you propose to (re)program this c | 01/01/70 00:00 | |
| use external interrupts | 01/01/70 00:00 | |
| DEEPEST APOLOGIES!!! | 01/01/70 00:00 | |
| Re DS5000 | 01/01/70 00:00 | |
| ds5000 | 01/01/70 00:00 | |
| Created a program! | 01/01/70 00:00 | |
| read up on UART modes in "the bible" | 01/01/70 00:00 | |
| A new idea! maybe the right one | 01/01/70 00:00 | |
| you are running out of timers | 01/01/70 00:00 | |
| using the COUNTER with the SERIAL port | 01/01/70 00:00 | |
| timer2 | 01/01/70 00:00 | |
| No timer 2 | 01/01/70 00:00 | |
| Your problem is that you need 3 counter/ | 01/01/70 00:00 | |
| erik | 01/01/70 00:00 | |
I think you have run into a mental block | 01/01/70 00:00 |