| ??? 01/05/06 21:26 Modified: 01/05/06 21:27 Read: times |
#106641 - query about the_final_word Responding to: ???'s previous message |
Jon (or anyone else),
I started looking at the aforementioned pdf (THE_FINAL_WORD_ON_THE_8051), but almost immediately had a question. At the top of page 9 (Listing A-5), where it refers to DATA and IDATA accesses there is the line: MOV R1, #22H ; set R1 to point at DATA address 22H Now I'm truly a noob here, but doesn't this actually mean: set R1 to the value 22H (0x22H)? In the same vein, on the first XDATA access line it says: MOV DPTR, #3048H ; set DPTR to point at XDATA address 3048H Same question as above, but different manuals. -- OR -- do I have a big case of RTFM? |
| Topic | Author | Date |
| decision | 01/01/70 00:00 | |
| well | 01/01/70 00:00 | |
| processor | 01/01/70 00:00 | |
| I'd use a SILabs f0xx, f1xx or f2xx | 01/01/70 00:00 | |
| decisions... | 01/01/70 00:00 | |
| I'm a BASCOM user | 01/01/70 00:00 | |
| do what I say but not what I do | 01/01/70 00:00 | |
| c for 8052 | 01/01/70 00:00 | |
| I would suggest | 01/01/70 00:00 | |
| 80c51 C and Asm | 01/01/70 00:00 | |
| Code space | 01/01/70 00:00 | |
| C Programming links | 01/01/70 00:00 | |
| query about the_final_word | 01/01/70 00:00 | |
| both the document and you are right: mor | 01/01/70 00:00 | |
| so it's my noob showing | 01/01/70 00:00 | |
Yours is more precise! | 01/01/70 00:00 | |
| Take a look at this | 01/01/70 00:00 | |
| good link | 01/01/70 00:00 |