| ??? 08/09/05 13:55 Read: times |
#99046 - Should be irrelevant... Responding to: ???'s previous message |
Richard Wiglinski said:
the settings for the hyperterminal are set directly at the hyperterminal. i open the exe. new connection. set name of connection, set com1, set the baud stop and parity and connect. These shouldn't make any difference, as it's a purely hardware loopback from the PC's output to the PC's input - so there should be no possibility of incompatible settings! |
| Topic | Author | Date |
| max232 loopback | 01/01/70 00:00 | |
| where do you set speed/parity/etc. | 01/01/70 00:00 | |
| RE: where do you set speed/parity/etc. | 01/01/70 00:00 | |
| Should be irrelevant... | 01/01/70 00:00 | |
| Maybe not helpful but | 01/01/70 00:00 | |
| Loopback | 01/01/70 00:00 | |
| RE: loopback | 01/01/70 00:00 | |
| OK then check max232 | 01/01/70 00:00 | |
| clarification please | 01/01/70 00:00 | |
| RE:clarification please | 01/01/70 00:00 | |
| Scope/. | 01/01/70 00:00 | |
| RE: Scope/. | 01/01/70 00:00 | |
| Tricky. | 01/01/70 00:00 | |
| RE: Tricky. | 01/01/70 00:00 | |
| Scopes | 01/01/70 00:00 | |
| Steve please qualify | 01/01/70 00:00 | |
| Logic Probe | 01/01/70 00:00 | |
| I misunderstood your post, I see you are | 01/01/70 00:00 | |
| thanks | 01/01/70 00:00 | |
| with a DMM | 01/01/70 00:00 | |
| Is your problem solved ? | 01/01/70 00:00 | |
| thanks for your help-i found the problem | 01/01/70 00:00 | |
three ? | 01/01/70 00:00 |