| ??? 04/17/05 11:38 Read: times |
#91762 - That's my project Responding to: ???'s previous message |
Charles Bannister thank you very much for the help you provided during my project .
The project ran like a gem. here is what I did. I took two aluminium bars coated them with epoxy to insulate them completely from each other. Then to maintain equal spacing I used a C type electrical bus bar spacers, they leave a space of around 5mm and are made of some kind of polycarbonate. I connected the leads from the bar in place of the C in the RC oscillator for cd4060.. then use 2051 to count the pulses,.. TDAAA>.. project done. Yeah I made a VB front end too.. it looked nice. hope some one can use this info to do some measurement. If anyone needs the pdf I am sharing it here http://www.ikraft.biz/project_8051/waterlevel.pdf Thank you Deepak |
| Topic | Author | Date |
| volumetric measurement? | 01/01/70 00:00 | |
| Old Problem solved with 4060 Oscillator | 01/01/70 00:00 | |
| dead link to pdf | 01/01/70 00:00 | |
| I have the pdf file in question. | 01/01/70 00:00 | |
| Also useful. | 01/01/70 00:00 | |
That's my project | 01/01/70 00:00 | |
| For in a tank.... | 01/01/70 00:00 | |
| Tank profile and accuracy of readings.. | 01/01/70 00:00 | |
| Interesting Tank Info | 01/01/70 00:00 | |
| Not as simple in some instances | 01/01/70 00:00 | |
| explosive atmospheres | 01/01/70 00:00 | |
| Better safe | 01/01/70 00:00 | |
| a reference | 01/01/70 00:00 | |
| QPROX | 01/01/70 00:00 |