| ??? 09/30/05 16:36 Read: times |
#101781 - AT89C51ED2 and external EEPROM |
Hi!
That's intresting question: Exist MB with AT89C51ED2 (64K) and place for external EEPROM. Programm start from AT89C51ED2 and lock bit 2 is set. How can i to know from internal programm, that external EEPROM chip installed or not ? Have AT89C51ED2 some features for that ??? P.S. MB was designed for AT89C31 + EEPROM 64K |
| Topic | Author | Date |
| AT89C51ED2 and external EEPROM | 01/01/70 00:00 | |
| If serial, try a write and a read, if pa | 01/01/70 00:00 | |
| some comments | 01/01/70 00:00 | |
| why "of course" most is serial | 01/01/70 00:00 | |
| I don't need 128K programm memory | 01/01/70 00:00 | |
| if it is not used, you can not detect it | 01/01/70 00:00 | |
| I must to do it by software | 01/01/70 00:00 | |
| You should have thought of that before y | 01/01/70 00:00 | |
| Re: hardware required | 01/01/70 00:00 | |
| leave harvard structure! | 01/01/70 00:00 | |
| it depends | 01/01/70 00:00 | |
| no meaning | 01/01/70 00:00 | |
| Software solution | 01/01/70 00:00 | |
| Sure, but why? | 01/01/70 00:00 | |
| Ask Sebastian | 01/01/70 00:00 | |
| Please explain further | 01/01/70 00:00 | |
| some explayning | 01/01/70 00:00 | |
| Use other device | 01/01/70 00:00 | |
XDATA? | 01/01/70 00:00 |