code uchar DataLookup[] ={
0x3F, 0x06, 0x5B, 0x4F, 0x66, 0x6D, 0x7D, 0x07, 0x7F, 0x67, 0x80, 0x80, 0x80, 0x80,
0x80, 0x80, 0x80, 0x77, 0x7C, 0x39, 0x5E, 0x79, 0x71, 0x6F, 0x76, 0x30, 0x0E, 0x80,
0x38, 0x80, 0x80, 0x5C, 0x73, 0x80, 0x80, 0x6D, 0x80, 0x3E, 0x80, 0x80, 0x80, 0x80,
0x80};

uchar D6,D5,D4,D3,D2,D1,D0;
I2C_Data_Array[0] = Count[0];
D0 = (( I2C_Data_Array[0] / 1000000)      + '0') - 0x30;
D1 = (((I2C_Data_Array[0] / 100000) % 10) + '0') - 0x30;
D2 = (((I2C_Data_Array[0] / 10000)  % 10) + '0') - 0x30; 
D3 = (((I2C_Data_Array[0] / 1000)   % 10) + '0') - 0x30;
D4 = (((I2C_Data_Array[0] / 100)    % 10) + '0') - 0x30; 
D5 = (((I2C_Data_Array[0] / 10)     % 10) + '0') - 0x30; 
D6 = (( I2C_Data_Array[0]           % 10) + '0') - 0x30;
transmit_bytes[6] = DataLookup[D6];
transmit_bytes[5] = DataLookup[D5];
transmit_bytes[4] = DataLookup[D4];
transmit_bytes[3] = DataLookup[D3];
transmit_bytes[2] = DataLookup[D2];
transmit_bytes[1] = DataLookup[D1];
transmit_bytes[0] = DataLookup[D0];
MAX_NUMBYTE_TX[0] = 6; //Send 7 Bytes of data
i2c_init(0x20, 0); //Set to master with address of 0x20, no general call
i2c_transmit(device_address);
while (i2c_getstatus() & I2C_BUSY);	// wait until complete