//Initialize Message Object for RX
void init_msg_object_RX (char MsgNum)
{
  SFRPAGE  = CAN0_PAGE;
  CAN0ADR  = IF1CMDMSK;  // Point to Command Mask 1
  CAN0DAT  = 0x00B8;     // Set to WRITE, and alter all Msg Obj except ID MASK
                         // and data bits
  CAN0ADR  = IF1ARB1;    // Point to arbitration1 register
  CAN0DAT  = 0x0000;     // Set arbitration1 ID to "0"
  CAN0DAT  = 0x8004;     // Arb2 high byte:Set MsgVal bit, no extended ID,
                         // Dir = RECEIVE
  CAN0DAT  = 0x0480;     // Msg Cntrl: set RXIE, remote frame function disabled
  CAN0ADR  = IF1CMDRQST; // Point to Command Request reg.
  CAN0DATL = MsgNum;     // Select Msg Obj passed into function parameter list
                         // --initiates write to Msg Obj
  // 3-6 CAN clock cycles to move IF register contents to the Msg Obj in CAN RAM
}

//Initialize Message Object for TX
void init_msg_object_TX (char MsgNum)
{
  SFRPAGE = CAN0_PAGE;
  CAN0ADR = IF1CMDMSK;  // Point to Command Mask 1
  CAN0DAT = 0x00B2;     // Set to WRITE, & alter all Msg Obj except ID MASK bits
  CAN0ADR = IF1ARB1;    // Point to arbitration1 register
  CAN0DAT = 0x0000;     // Set arbitration1 ID to highest priority
  CAN0DAT = 0xA000;     // Autoincrement to Arb2 high byte:
                        // Set MsgVal bit, no extended ID, Dir = WRITE
  CAN0DAT = 0x0081;     // Msg Cntrl: DLC = 1, remote frame function not enabled
  CAN0ADR = IF1CMDRQST; // Point to Command Request reg.
  CAN0DAT = MsgNum;     // Select Msg Obj passed into function parameter list
                        // --initiates write to Msg Obj
  // 3-6 CAN clock cycles to move IF reg contents to the Msg Obj in CAN RAM.
}