I2CON=0x44;             // Initializing for 94KHz Auto Ack on.
I2CON|=0x20;            // Send a start condition.
while(!(I2CON&0x08));	//Wait for SI
I2CON&=0xDF;	        // Clear start bit.
I2DAT=0x91;		// Slave address 000 and read.
I2CON&=0xF7;		// Clear the SI Flag.
while(!(I2CON&0x08));	//Wait for SI
I2CON&=0xF7;		// Clear the SI Flag.
EI2C=1;			// Set I2C interrupt flag to turn on interrupt.